Hella 90mm main Bream h7 smart roadster

You have to cut / remove one of the aluminium fixing points to fit the light unit into the smart roadster light mounting frame. This means you can't return the item. To fit the left side you must remove the upper left. And to fit the right side you must remove the upper right (as viewed from the front of the light unit) takes about 5 minutes with a good hacksaw. Basically it's one unit that's sold - and it's not sided so it must be altered. Was moaning about the lack of fixings. And reused my old mounting screws. Which is awkward to do. But on tidy up. They were in the box below the packaging