Most car parts give you a warning before they fail. A cambelt usually doesn't. It runs quietly behind a plastic cover for years, and then one day it snaps. On many engines, that means bent valves and a repair bill that can be worth more than the car.
So the cambelt is one job you do on time, not when something sounds wrong. Here's how to know when yours is due, and what should be changed at the same time.
Cambelt or timing belt?
They're the same thing. "Cambelt" is the usual UK name, "timing belt" is what you'll see in most manuals. It's a toothed rubber belt that links the crankshaft to the camshaft, so the valves open and close at exactly the right moment as the pistons move.
Not every car has one. Many engines use a metal timing chain instead, which is designed to last much longer and usually only needs attention if it starts to rattle or stretch. Your handbook or service schedule will tell you which your car has. If you're not sure, a garage or main dealer can tell you from the registration.
When should you change it?
Every manufacturer sets its own interval, and it varies a lot. Some belts are due at around 40,000 miles, others go 100,000 miles or more. There's almost always an age limit too, often somewhere between four and ten years, whichever comes first.
The age limit catches a lot of people out. A car that only does a few thousand miles a year can still need a new belt, because the rubber hardens and cracks with time.
Change it sooner than the schedule if:
- You've bought a used car and there's no proof the belt has been done
- Oil or coolant has been leaking onto the belt
- The water pump has failed, if your pump is driven by the cambelt
- The car has been laid up for a long time
Signs a cambelt is worn
Honestly, there often aren't any. That's what makes it risky. Sometimes you'll hear a ticking or whirring from the front of the engine, which can come from a worn tensioner or idler pulley. A rough idle, misfires or trouble starting can also point to a belt that's jumped a tooth. If you hear new noises from the belt area, get it looked at quickly.
What happens if it snaps?
The engine stops straight away. On an "interference" engine, which covers many modern petrol and most diesel engines, the pistons and valves share the same space at different moments. When the timing is lost, they hit each other. That can mean bent valves, damaged pistons and a cylinder head rebuild, or a replacement engine.
What to replace with the cambelt
Most of the cost of a cambelt change is labour, because a lot has to come apart to reach it. So it makes sense to replace the parts that wear alongside it while everything is open.
Tensioner and idler pulleys
These keep the belt at the right tension and guide it around the engine. Their bearings wear out at a similar rate to the belt, and a seized pulley can destroy a new belt. That's why most garages fit a full cambelt kit with the belt, tensioner and idlers together.
Water pump
On many engines, the cambelt drives the water pump. If the pump starts leaking or its bearing fails later, coolant can soak the new belt or the pump can seize, and the belt has to come off again to fix it. Replacing the pump at the same time costs far less than doing the job twice. You'll often see this sold as a cambelt kit with water pump.
Auxiliary belt
The auxiliary belt, which drives the alternator and other parts, usually has to come off anyway. It's cheap to replace while it's off.
Seals
If the camshaft or crankshaft oil seals are leaking, replace them now. Oil on a cambelt shortens its life.
How much does a cambelt change cost?
It depends heavily on the engine. On a simple, easy-to-reach engine, a cambelt and water pump change at an independent garage is often a few hundred pounds. Engines where the belt is hard to get at, or that need special tools, can cost a lot more. Ask for a quote that includes the kit, the water pump and coolant, so you know what you're comparing.
Whatever the price, it's small next to the cost of a rebuilt engine.
Doing it yourself?
A cambelt change is a job for someone with experience. Getting the timing even slightly wrong can damage the engine. Most engines need the camshafts and crankshaft locked in position with the correct timing tools while the belt is changed. Always follow the manufacturer's procedure and torque settings.
Parts and tools
We stock a range of water pumps from Hella and other brands, along with more cooling parts and engine parts. For the timing itself, we have a camshaft timing locking tool set and a timing gear clamp tool.
Water pumps and timing parts are specific to the engine, so match the part number on your old part or check the engine code. If you're not sure, send us your VIN and we'll help you find the right one.
Keeping up with servicing is the best way to avoid big bills. Our guide to the service that could save your engine explains more.